REF 43017

ROLL UP DIVIDING CURTAIN

Roll up dividing curtain made of fabric canvas with flame retardancy B1/M2 with double - cloth 620 gr/m2, plasticized and powder coated in two sides canvas. Fold-up-to-ceiling motorized system.

ROLL UP dividing curtain made of simple fabric with a new fold-up-to-ceiling motorized system.

AUXILIARY STRUCTURE:

Steel quality S-275 JOH, S-235-JR, (DD 11) SAE 1008, cold rolled composed of the necessary auxiliary structure (Studied and designing the most appropriate auxiliary structure in each particular case).

MAIN STRUCTURE:

Anchored to the existing trusses of the structure. Winding shaft made of Ø111 mm aluminum tube, with upper supports. These supports will be fixed to the metal structure by means of clamps held by pressure screws and welding along the aluminum profile, the distance between them will depend on the size of the curtain. In addition, it has two cardan joints, one at each end, which allows the curtain to be rotated to roll it up at a different height and a bearing at the other end of the motor to facilitate rotation.

ELECTRIC MOTOR:

1 CV electric motor (1.5 / 2CV according to dimensions) at 1,500 r.p.m. with the following characteristics:

The motor incorporates a limit switch system (cam type) for raising and lowering, which act automatically when it reaches the end of the stroke, stopping both up and down. The motorization system incorporates an electric brake system that blocks the motor both in its upward and downward movements, causing a double blockage both by the reducer and by the electric brake shoes, always preventing the canvas from falling due to failure of the reducing.

TECHNICAL DATA OF FOLD UP TO CEILING SYSTEM:

The curtain has a motor located at one end, which is responsible for generating movement to the cardan joint located after it. These cardan joints are responsible for providing the rotary movement generated by the motor at different heights, allowing the aluminum profile to rotate so that the Trevira fabric is rolled up for folding.

In addition, it consists of a bearing profile that helps the motor from the other end so that the aluminum one together with the Trevira fabric rotates simultaneously throughout the entire route.

Our innovative low-maintenance ROLL UP fold up to ceiling system does not require any conventional lifting cable or strap system, which stain the canvas or even cut it due to the resistance that arises from holes, etc.

Aesthetically it is a clean system, taking care of elements such as cables or tapes, of other colors, etc.

It occupies a minimum space when it is collected.

CURTAIN CONTROL COMMAND:

The curtains will be controlled from the inverter panel or cabinet, made of high quality metal according to the R.E.B.T. Located in a suitable place in the installation and with visibility to them. This consists of a key with a lid lock to protect everything inside it (motor regulation mechanisms), it has an emergency stop (mushroom), a phase change failure control system and a light and acoustic signal (optional). up and down.

Inverter cabinet dimensions by number of motors: Table 2 and 3 motors: 500 x 400 x 200mm.

The activation of the up / down curtain can be done from the panel itself through its keypad or by remote control (optional).

The motor incorporates a limit switch system (cam system) for raising and lowering that act automatically when it reaches the end of the stroke, causing it to stop.

Get a price